|
How Do You Use An Electronic Cigarette?Are you one of the many smokers who want to quit? Well, you have probably thought of buying an electronic cigarette for yourself. Here is an easy to follow guide on how you can use an electronic cigarette: Basically, an electronic cigarette has two parts only. You can choose to use E9 or E8. All you have to do is connect the cartridge with the battery. Then, connect the battery with the use of USB adaptor. Plug the USB adaptor to either a car charger or through your laptop or PC. Remember, the charger’s voltage is around AC100V-240V, 50/60 Hz. Charge the battery for about 3-4 hours. You will know when the battery is fully charged when the light will turn to green. Now, the battery is fully charged, you are ready to puff the electronic cigarette. Start inhaling and the e-cigarette will have the light turn to red. Thus, simulates the act of smoking. When you detect the light (red) turned to a darker color, it is an indication that you do need to recharge the e-cigarette’s battery. The life span of the cartridge will be around 20-30 days depending upon the frequency that you use the e-cigarette. When the smoke turns to be a little bit less than the usual, you do need to get a new cartridge and charge the battery in full. After changing the cartridge to a new one and charged the battery, you need to reset the electronic cigarette into to its normal working condition. All you need to do is get the cartridge through the use of a paper clip or a safety pin. Then, reach for the reset hole and press it for about three seconds at least two times. Just a word of precaution you should never attempt to reset the e-cigarette too often. |
 |